Requires Adaptive Cruise Control relocation bracket for adaptive cruise control equipped vehicles
Hammer black powder coat finish
Satin black powder coat panel finish
Universal light mount for up to 6 cube lights or 20" radius light bar
Optional add-on light hoop that holds four 6" round lights
 
Winch kit will not fit any year Raptor R
*With additional light hoop installed, the reverse braking assist feature will turn off and a warning message will be displayed on your dash
*With additional light hoop installed, front parking sensors may become inactive
*With additional light hoop and lights installed, front camera visbility will be hindered

🚩 INTERCOOLER KIT 
 
🚩 2021 - 2023 ADAPTIVE CRUISE CONTROL BRACKET
 
🚩 2024+ ADAPTIVE CRUISE CONTROL BRACKET
 
🚩  WINCH KIT
-
 
🚧 SELECT CENTER LIGHTS 🚧
 
➟ 20'' Baja Designs OnX6+ Straight LED Light Bar AMBER (Driving/Combo)
 
➟ 20'' Baja Designs OnX6+ Straight LED Light Bar
 
➟ 20'' RIGID RDS-SERIES PRO SPOT MIDNIGHT
 
➟ 20'' RIGID RDS-Series Pro SPOT Black
 
➟ 20'' RIGID Radiance+ Curved RGBW Light Bar
-
 
🚩 LIGHT HOOP
 
🚧 SELECT TOP LIGHTS 🚧
 
➟ 2 x RIGID 360-Series RGBW 6'' DRIVE Optic with RGBW Backlight Pods
 
➟ 2 x RIGID 360-Series RGBW 6'' SPOT Optic with RGBW Backlight Pods
 
➟ 2 x Baja Designs LP6 Pro LED Auxiliary Light Pod
 
➟ 2 x Baja Designs LP6 Pro LED Auxiliary Light Pod (AMBER)
-
 
The Pro-Bolt On Front Bumper for the 2021-2024 Ford Raptor & 2023 Raptor R is our slimmest fitting bumper, and was designed in a prerunner style. The main radius .120-inch wall steel tube closely follows the contours of the front end and sits flush with the grille/valance. It features an 1/8-inch aluminum skid plate that is vented to ensure proper airflow reaches the OEM intercooler. This bumper allows you to keep the intercooler in its original position.
 
At the center of the bumper is a universal light mount with a couple of lighting options. Up to 6 cube lights, or a 20-inch radius LED light bar can be mounted here. The lights are protected from impact by the lower steel tube & skid plate, as well as side steel plating.
 
We offer the optional ADD PRO Bolt-On Light Hoop if you'd like even more supplemental lighting on the trail in low-light conditions. The hoop can mount up to four 6-inch round lights. Manufactured from the same .120-inch steel wall tubing, the hoop maintains the same low-profile styling as the bumper itself. As always, this Raptor bumper is fully bolt-on and Made in America.
 
We include a shutter motor bracket with your bumper. However, if you previously purchased this bumper and need a shutter motor bracket, you can find it here.
 
Tightly follows the contours of the front end
Low profile
Retains OEM intercooler location
Light mounts for up to 6 cube lights or a 20" radius LED bar
.120" wall steel tubing
CNC cut aluminum skid plate
Compatible w/ ADD Intercooler (Will Require Shutter Motor Relocation Kit)
If installing the Intercooler Upgrade Kit, 2024-2025 models require an additional shutter motor relocation kit
Optional light hoop
Made in America
 
ADD Raptor Pro Bolt-On Winch Kit
 
This conversion kit enables your 3rd Gen Raptor Pro Bolt-On Front Bumper to accommodate a winch, so you can be prepared for any recovery situation. The winch mount bolts directly to the truck's frame for maximum strength, and is concealed behind the winch plate for a clean look. Simply select this option from the drop-down menus to add it to your cart.
 
** Winch kit will not fit any year Raptor R